TM-9-2350-260-20-1-2
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9
TM-9-2350-260-20-1-2 - Page 31 of 772
TM 9-2350-260-20-1-2
POWERPLANT REPLACEMENT (2A ENGINE) (Sheet 20 of 24)
37.
Engage rod ends (use pliers if necessary) and manually install screw, new lockwasher, and nut (Z) (each side of
tank).
38.
Using 7/16 inch socket on screw and 7/16 inch wrench to hold nut, tighten screw, lockwasher, and nut (Z).
39.
Manually position boot (X) and two clamps (W)
and, using 5/16 wrench, tighten two clamps (W)
(each side of tank).
40.
Wearing rubber gloves, use rags (Item 65,
Appendix D) and dry cleaning solvent (Item 54,
Appendix D) to clean contact areas of brake rod
access covers (AA) and hull.
41.
Apply adhesive (Item 2, Appendix D) to both sides
of two new gaskets.
Position two new gaskets
onto inner side of two brake rod access covers
(AA).
Go on to Sheet 21
TA147922
5-21
Back to Top
