TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

  TM-9-2350-260-20-1-3 - Page 172 of 783

TM 9-2350-260-20-1-3
INSTRUMENT PANEL CLUSTER ASSEMBLY REPAIR (Sheet 21 of 23)
Instrument Panel Wiring Harness Replacement (Sheet 3 of 4)
10.
Disconnect two leads No.
40 from two panel lights
(M).
11.
Loosen receptacle connector retainer nut (N) and
slide back on leads.
12.
Remove wiring harness from panel.
INSTALLATION:
1.
Apply silicone compound (Item 32, Appendix D) to
16 lead connectors of instrument panel wiring
harness.
2.
Place wiring harness in position in panel.
3.
Using pliers, tighten receptacle connector retainer
nut (A) to receptacle connector (B).
4.
Using screwdriver, install four screws and new
lockwashers (C) securing receptacle connector (B)
to panel.
5.
Using wrench, install nut and flatwashers (D)
securing harness junction (E) to panel.
Go on to Sheet 4
TA147192
10-160


Back to Top