TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 179 of 783

TM 9-2350-260-20-1-3

MASTER CONTROL PANEL MOUNTING PLATE ASSEMBLY REPLACEMENT (Sheet 2 of 2)

REMOVAL:

1.

Using 9/16 inch socket, remove eight screws and washers (A).

2.

Lift two slave receptacles (B) upward and out of mounting bracket (C).

3.

Using 9/16 inch socket, remove seven screws (D), lockwashers (E), flatwashers (F), and inserts (G) securing control

panel plate (H).

Throw lockwashers away.

4.

Remove plate (H).

INSTALLATION:

1.

Mount plate (H) into position at right side of driver's seat.

2.

Using 9/16 inch socket, install seven screws (D), new lockwashers (E), fiat washers (F), and inserts (G) securing plate

(H).

3.

Install master control panel (page 10-56).

4.

Install personnel heater fuel pump (page 7-68).

5.

Position two slave receptacles (B) into mounting bracket (C).

6.

Using socket, install eight screws and washers (A).

7.

Install headlight stowage (page 10-170).

8.

Install bilge pump mounting plate and dummy shell (page 10-165).

Go on to Sheet 3

TA147199

10-167