TM 9-2350-260-20-1-3
PROTECTION DEVICE REPLACEMENT (Sheet 3 of 3)
INSTALLATION:
1.
Manually start protection device (A) onto master relay (B).
2.
Using 3/4 inch wrench, install protection device (A) onto master relay (B).
3.
Manually start connector (C) onto protection device
(A).
4.
Using 7/8 inch wrench, install connector (C).
5.
Manually start connector (D) onto master relay (B).
6.
Using spanner wrench, install connector (D).
7.
Close turret platform access door (TM 9-2350-260-10).
End of Task
TA147208
10-176