TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 185 of 783

TM 9-2350-260-20-1-3

MASTER RELAY REPLACEMENT (Sheet 3 of 3)

INSTALLATION:

1.

Traverse turret to expose master relay.

Position master relay (A) into plate (B).

2.

Using socket, install two bolts (C) four new lockwashers (D), and two nuts (E) to hold master relay (A) to bracket (F).

NOTE

If your tank has protection device (G), continue with steps 3 through 8.

If your tank

does not have protection device (G), skip step 3 and continue with steps 4 through

8.

3.

Using 3/4 inch wrench, install protection device (G) to master relay (A).

4.

Using 7/8 inch wrench, install connector (H) to protection device (G).

5.

Using spanner wrench, install connector (J) to master relay (A).

6.

Using spanner wrench, install connector (K) to master relay (A).

7.

Connect three battery ground straps (page 10-294).

End of Task

TA147205

10-173