TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 184 of 783

TM 9-2350-260-20-1-3

MASTER RELAY REPLACEMENT (Sheet 2 of 3)

REMOVAL:

1.

Using spanner wrench, remove connector (A) from master relay (B).

2.

Using spanner wrench, remove connector (C) from master relay (B).

3.

Using 7/8 inch wrench, remove connector (D).

NOTE

Some tanks do not have protection device (E).

If your tank does not have

protection device (E), skip step 4 and go on to steps 5 and 6.

If your tank does

have protection device (E), continue with steps 4 through 6.

4.

Using 3/4 inch wrench, remove protection device (E) from master relay (B).

5.

Using socket and 1/2 inch wrench, remove two bolts (F), four lockwashers (G), and two nuts (H).

Throw lockwashers

(G) away.

6.

Remove master relay (C) from plate (J) and from tank.

Go on to Sheet 3

TA147204

10-172