TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 191 of 783

TM 9-2350-260-20-1-3

STARTER RELAY ASSEMBLY REPLACEMENT (Sheet 3 of 3)

INSTALLATION:

1.

Position relay (A) onto mounting plate.

2.

Using 7/16 inch socket, install and tighten four

screws (B) securing relay (A) to mounting plate.

3.

Install bus bar (C) onto relay (A) stud and install nut

(D).

4.

Install bus bar (E) onto relay (A) stud and install nut

(F).

5.

Using torque wrench and 3/4 inch socket, tighten nut

(D) and (F) 14 to 16 lb-ft. (1820 N

•

m).

6.

Position cover (G) over relay (A).

7.

Using 7/16 inch socket, install and tighten three screws (H) and washers (J) securing cover (G) to mounting plate.

8.

Connect three battery ground straps (page 10-294).

9.

Start engine (TM 9-2350-260-10).

10. Stop engine (TM 9-2350-260-10).

End of Task

TA147211

10-179