TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 182 of 783

TM 9-2350-260-20-1-3

HEADLIGHT STOWAGE LAMPHOLDER REPAIR AND REPLACEMENT (Sheet 2 of 2)

DISASSEMBLY:

1.

Using screwdriver, remove two screws (A) with

assembled lockwashers.

2.

Remove defective spring clip (B) from lampholder

(C) and throw it away.

ASSEMBLY:

1.

Place new spring clip (B) in position on lampholder

(C).

2.

Using screwdriver, install two screws (A) with

assembled lockwashers.

INSTALLATION:

1.

Place lampholder (C) in position at mounting

location.

2.

Using wrench, install three flat washers (D), new

lockwashers (E), and screws (F).

3.

Manually install dust cap (G) by turning clockwise.

End of Task

TA147202

10-170