TM 9-2350-260-20-1-3
HEADLIGHT STOWAGE LAMPHOLDER REPAIR AND REPLACEMENT (Sheet 1 of 2)
TOOLS:
Flat-tip screwdriver
3/8 in. combination box and open end wrench
SUPPLIES:
Spring clip (7739925)
Lockwasher (MS35338-44)
(3 required)
NOTE
There are two Iampholders at drivers
station.
Removal and installation are the
same for each lampholder.
REMOVAL:
1.
Using hand, remove dust cap (A) by turning
counterclockwise.
2.
Using
wrench,
remove
three
screws
(B),
lockwashers (C), and flat washers (D).
Throw
lockwashers away.
3.
Remove lampholder (E).
Go on to Sheet 2
TA147201
10-169