TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 176 of 783

TM 9-2350-260-20-1-3

BILGE PUMP STOWAGE RECEPTACLE PLATE REPLACEMENT (Sheet 1 of 2)

TOOLS: Ratchet with 1/2 in.

drive

7/16 in.

socket with 1/2 in.

drive

7/16 in.

combination box and open end wrench

11/32 in.

open end wrench

Flat-tip screwdriver

6 in.

extension with 1/2 in.

drive

SUPPLIES:

Lockwasher (MS35333-40) (4 required)

Lockwasher (MS35338-40) (2 required)

REMOVAL:

1.

Using 7/16 inch wrench to hold nut (A), use socket

to remove screw (B), lockwasher (C), ground strap

from fuel pump (D), washer (E), clamp (F), and

lockwasher (G).

Throw lockwashers (C) and (G)

away.

2.

Remove plate (H) from plate assembly (J).

3.

Remove connector (K) from shell (L).

4.

Using screwdriver, remove four screws (M) and

lockwashers (N).

Throw lockwashers (N) away.

5.

Remove shell (L) from plate (H).

Go on to Sheet 2

TA147196

10-164