TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 192 of 1008

REPLACE STARTER — Continued

3.

Remove nut (9) (screw on Prestolite), two lockwashers (10) (Delco and Leece Neville only), and circuit 74A lead

(11) from terminal on solenoid. Discard lockwashers.

WARNING

Avoid injury. Get an assistant to help you lift the starter or use a hoist. Starter weighs about

75 pounds (34 kg).

4.

Remove three bolts (1), lockwashers (2), starter (3) with solenoid (4), and gasket (5) (if installed) from engine (6).

Discard lockwashers.

CLEANING

1.

Check starter drive teeth. Remove burrs. Replace starter that has damaged teeth or teeth worn beyond original shape.

INSTALLATION

NOTE

Check that starter-to-engine housing gasket is in place. Gasket is necessary to keep water

out of starter.

0236 00-2

0236 00

TM 9-2350-261-20-2