TM 9-2350-261-20-2
REPLACE STARTER GROUND LEADS
0237 00
THIS WORK PACKAGE COVERS:
Removal (page 0237 00-1).
Cleaning (page 0237 00-2).
Installation (page 0237 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Materials/Parts
Locknut
Personnel Required
Unit Mechanic
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Trim vane lowered (see your -10)
Power plant front access door open (see your -10)
Battery ground lead disconnected (WP 0294 00)
REMOVAL
1.
Remove nut (1), washer (2), short ground lead (3), and long ground lead (4) from starter (5).
NOTE
Some carrier hull grounds may have star washers. Discard star washers and assemble ground
leads with flat washers as instructed in the installation steps.
2.
Remove screw (6), washer (7), and short lead (3) from engine block. Remove lead from carrier.
3.
Remove locknut (8), long lead (4), two washers (9), and screw (10) from hull mount. Remove lead from carrier. Discard
locknut.
023700-1