TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 193 of 1008

REPLACE STARTER — Continued

1.

Install gasket (5) on engine (6).

2.

Place starter (3) with solenoid (4) on engine (6). Secure with three new lockwashers (2) and three bolts (1). TIGHTEN

SCREWS TO 137-147 LB-FT (186-199 N·M) TORQUE. Use torque wrench.

3.

Install two new lockwashers (10) (Delco and Leece Neville only) and circuit 74A lead (11) on terminal of starter

solenoid. Secure with nut (9) (screw on Prestolite).

4.

Install new lockwasher (10) and circuit 6 lead (11) on terminal of solenoid (4). Secure with nut (12).

5.

Install new lockwasher (13) and two ground leads (14) on terminal of starter (3). Secure with nut (15).

6.

Go to FOLLOW-THROUGH Steps 1 - 4.

0236 00

TM 9-2350-261-20-2

023600-3

0236 00

TM 9-2350-261-20-2