TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 865 of 1008

TM 9-2350-261-20-2

REPLACE TRANSMISSION RANGE SELECTOR

0404 00

THIS WORK PACKAGE COVERS:

Removal (page 0404 00-1).

Installation (page 0404 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Materials/Parts

Locknut

Spring pin

Personnel Required

Unit Mechanic

Helper (H)

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

Trim vane lowered and power plant front access door

open (see your -10)

Driver’s power plant access panel removed

(WP 0430 00)

Air cleaner housing and element removed (WP 0185 00)

REMOVAL

1.

Remove screw (1) and locknut (2). Discard locknut.

2.

Disconnect link (3) from arm (4).

3.

Remove spring pin (5) and arm (4) from range selector (6). Discard spring pin.

4.

Disconnect two electrical leads (7) and (8) from circuits 74 and 74A.

5.

Remove three screws (12), washers (13), and range selector (6) from driver’s compartment bulkhead.

040400-1