TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 866 of 1008

TM 9-2350-261-20-2

REPLACE TRANSMISSION RANGE SELECTOR — Continued

0404 00

INSTALLATION

1.

Place range selector (1) on driver’s compartment bulkhead. Secure with three washers (2) and screws (3).

2.

Install arm (4) on range selector (1). Secure with new spring pin (5).

3.

Install link (6) on arm (4). Secure with screw (7) and new locknut (8).

4.

Connect two electrical leads (9)and(10)tocircuits74and74A

.

FOLLOW-THROUGH STEPS

1.

Install air cleaner housing and element (WP 0185 00).

2.

Install driver’s power plant access panel (WP 0430 00)

3.

Close power plant front access door and raise trim vane (see your -10).

4.

Operate carrier to check that transmission range selector operates properly.

5.

Stop/shutdown engine (see your -10).

END OF TASK

0404 00-2