TM-9-2350-261-20-3
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4
TM-9-2350-261-20-3 - Page 42 of 932
TM 9-2350-261-20-3
REPLACE POWER PLANT DOOR COMBAT LOCK — Continued
0426 00
INSTALLATION
1.
(H): Install bolt (1) and spring (2) in place from outside of carrier through access to power plant compartment.
2.
From inside driver’s compartment, install handle (3) on bolt (1). Secure with new pin (4).
3 .
In stall f our w iring h a rness c onn ectors ( 5), 1 6 screws (6), an d new lo cknu ts (7) o n bulkhead.
4.
Connect four wiring harness connectors (8) to bulkhead connectors (5) inside driver’s compartment.
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0294 00).
2.
Close power plant door (see your -10).
3.
Connect and raise trim vane (see your -10).
END OF TASK
0426 00-2
Back to Top
