TM-9-2350-311-20-1

HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL FOR HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS

AUGUST 1994

TM-9-2350-311-20-1 - Page 307 of 1275

TM

9-2350-311-20

CONTINUED FROM STEP G

H

1. Reconnect portable instrument panel wiring

harness to portable instrument panel

disconnect.

2. Disconnect battery ground leads.

3. Disconnect bulkhead-to-headlights/bilge

pump wiring harness from drivers bulkhead.

4. Place a jumper wire from pin B to socket B

(lead 400-459B).

5. Reconnect battery ground leads.

6. Turn MASTER switch ON and check

TRANSMISSION OIL TEMP gage for a

reading.

7. If TRANSMISSION OIL TEMP gage shows a

maximum reading, place a jumper wire from

socket H (lead 324) to ground.

8. Turn MASTER switch OFF.

Does TRANSMISSION OIL TEMP gage show

minimum when grounded, and maximum when not

grounded?

Repair or replace lead 324 of

bulkhead-to-portable instrument

panel wiring harness (para 8-49).

CONTINUED ON NEXT PAGE

3-20