TM-9-2520-234-35

POWER TRAIN ASSEMBLY; ALLISON MODEL XTG411-2A

TECHNICAL MANUAL; FIELD AND DEPOT MAINTENANCE MANUAL

JULY 1962

TM-9-2520-234-35 - Page 203 of 323

PAR

227,

STEPS

31-3 4

ASSEMBL Y

CHAP

5,

SEC

XXXII I

Figure 270 (Step 31)

Install spacer (A), flanged end down. Using

sling (B) and two 5/16-24 bolts (C), install the

left-output clutch assembly (D). Remove sling,

and tap the assembly down while rotating it.

Install two remaining 5/16-24 x 5/8 bolts (E).

Using a l/2-inch wrench, torque the bolts to

14-18 pound-feet. Bend corners of lock strips

(F) against bolt heads.

Figure 271 (Step 32)

Install nine geared steer clutch piston return

springs (A). Install an external-splined steer

clutch plate (B).

Figure 272 (Step 33)

Alternately install the remaining six internal-

(A) and six external-splined (B) steer clutch

plates, beginning with an internal-spline d

plate.

Figure 273 (Step 34)

Using sling (A), three 7/16-14 bolts (B) and

the guide bolt (C), install the reaction plate as-

sembly (D). Note the location of the plugs (E)

in the assembly in relation to the housing (F).

17 1