TM-9-2520-234-35

POWER TRAIN ASSEMBLY; ALLISON MODEL XTG411-2A

TECHNICAL MANUAL; FIELD AND DEPOT MAINTENANCE MANUAL

JULY 1962

TM-9-2520-234-35 - Page 206 of 323

CHAP

5,

SEC

XXXII I

ASSEMBL Y

PAR

227,

STEPS

43-4 6

Figure 282 (Step 43)

Install a 7/16-14 x 1-1/2 bolt (A) and a lock

washer at the rear of the transmission main-

to-rear housing split line. Install a 1/2-13 x

2-3/4 bolt (B) at the front. Tighten the two

evenly to draw the housings together.

Figure 283 (Step 44)

Install the remaining three 1/2-13 x 2-3/ 4

bolts (A) with lock washers (B) and three l/2-

13 x 2-3/4 self-locking bolts (C) with fla t

washers (D). Do not tighten bolts at this time.

17 4

Figure 284 (Step 45)

Install one 5/8-11 x 2 bolt (A) with lock wash-

er (B), fourteen 7/16-14 x 1-1/2 bolts (C )

with lock washers (D), and two 1/2-13 x 1-3/4

bolts (E) with lock washers (F). Do not tighten

bolts at this time.

Figure 285 (Step 46)

Install two 5/8-11 x 3 self-locking bolts (A)

and flat washers (B). Install one 1/2-13 x 4

bolt (C) with flat washers (D). Tighten bolts

(A) to 164-192 pound-feet. Tighten bolt (C)

to 81-97 pound-feet.