TM-9-2520-234-35

POWER TRAIN ASSEMBLY; ALLISON MODEL XTG411-2A

TECHNICAL MANUAL; FIELD AND DEPOT MAINTENANCE MANUAL

JULY 1962

TM-9-2520-234-35 - Page 226 of 323

CHAP

5,

SEC

XXXII I

ASSEMBL Y

PAR

229,

STEPS

7-1 0

Figure 362 (Step 7)

Install saddle and planetary assembly (A) onto

output drive housing (B), alining index marks

Install three 5/8-18 x 1-1/4 screws (C).

Figure 363 (Step 8)

Using lifting eye (A) and hoist to prevent out-

put drive assembly (B) from turning, tighten

24 bolts (C). Using a 1-1/8-inch wrench ,

torque the bolts to 575-650 pound-feet.

19 4

Figure 364 (Step 9)

Install input shaft (A), meshing it with the

planetary pinions.

Figure 365 (Step 10)

Install alinement ring (A). Install saddle cap

assembly (B). Install loosely six 3/8-24 x

1-1/4 bolts (C) with lock washers (D), since

cap assembly is removed when unit is install-

ed in vehicle.

Note. Alinement ring (A) is

used on only the right (shorter) assembly.