TM-9-2520-238-34

M113A1 FOV, M113A2 FOV, M548 AND M548A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL; RIGHT ANGLE DRIVE, COOLING FAN; GEARCASE, TRANSFER; DRIVE ASSEMBLY, FINAL; DIFFERENTIAL, STEERING CONTROL; BRAKE, SINGLE DISK; CYLINDER ASSEMBLY, HYDRAULIC BRAKE

TM-9-2520-238-34 - Page 209 of 319

TM 9-2520-238-34

REPAIR OUTPUT SHAFT ASSEMBLIES — Continued

0024 00

3.

Remove piston ring (1), piston ring retainer (2), and ball bearing (3) from output shaft (4). Use remover and replacer

(WP 0033 00, Item 20) and arbor press. Remove piston ring (1) from retainer (2). Discard piston ring.

4.

Remove gasket (5) and oil seal retainer (6) with encased oil seal (7) from output shaft (4). Discard gasket.

5.

Tap out oil seal (7) from retainer (6) with hammer. Discard oil seal.

NOTE

If inspection indicates shoulder bolt(s) is damaged, do Step 6.

6.

Remove shoulder bolt(s) (8) from output shaft (4). Use arbor press.

0024 00-3