TM-9-2520-238-34

M113A1 FOV, M113A2 FOV, M548 AND M548A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL; RIGHT ANGLE DRIVE, COOLING FAN; GEARCASE, TRANSFER; DRIVE ASSEMBLY, FINAL; DIFFERENTIAL, STEERING CONTROL; BRAKE, SINGLE DISK; CYLINDER ASSEMBLY, HYDRAULIC BRAKE

TM-9-2520-238-34 - Page 211 of 319

TM 9-2520-238-34

REPAIR OUTPUT SHAFT ASSEMBLIES — Continued

0024 00

NOTE

Steps 8 - 13 apply to right output shaft assembly.

8.

Straighten tabs on four key washers (1). Remove four cap screws (2), key washers, and oil seal retainer (3) with output

shaft (4) from output shaft support (5). Discard key washers.

9.

Straighten tabs on key washer (6). Remove round retaining nut (7) and key washer from output shaft (4). Discard key

washer.

10. Remove piston ring (8), piston ring retainer (9), and ball bearing (10) from output shaft (4). Use remover and replacer

(WP 0033 00, Item 20) and arbor press. Remove piston ring (8) from retainer (9). Discard piston ring.

0024 00-5