TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 130 of 779

Disconnect

1. Remove vent plug (A) from fuel / water separator

filter cover.

2. Disconnect fuel / water separator filter inlet hose (B)

at fuel pump outlet and drain fuel into a suitable

container.

Connect

1. Connect fuel / water separator filter inlet hose (B) to

fuel pump outlet.

2. Instnll vent plug (A) in fuel / water separator filter

cover.

Figure 4-94. Disconnecting or connectin g

fuel water separator filter inlet hose a t

Disconnect

1. Disconnect fuel outlet hose (A) and remove fuel-

outlet elbow.

2. Disconnect fuel drain tube (B) and remove fuel drain

elbow.

3. Disconnect fuel inlet hose (C) and remove fuel inlet

elbow.

Connect

1. Install fuel inlet elbow and connect fuel inlet hose (C).

2. Install fuel drain elbow and connect fuel drain tube

(B).

3. Install fuel outlet elbow and connect fuel outlet hose

(A).

Figure 4-95. Disconnecting or connectin g

fuel hoses and drain line at fuel / water

separater

filter.

fuel pump .

4-4 8