TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 127 of 779

elemen t

engin e

and is replaced annually or at time o f

figures are listed under appropriate headings in

overhaul. Refer to Table 4-2 fo r

the table .

replacement and service instructions. Reference

Table 4-2. Main and Auxiliary Oil Filter Bypass Valves, Oil Pressure

Regulating Valve, and Fuel / Water Separator Filter Assembly

Component

Main Oil Filter Bypass Valve

Auxiliary Oil Filter Bypass Valve

Oil Pressure Regulating Valve

Fuel / Water Separator Filter Assembly

Fuel / Water Separator Filter Elements

4-6.

Replacement Instructions

Remove

1. Remove main oil filter bypass valve plug (A).

2. Remove and discard plug gasket (B).

3. Remove bypass valve spring (C).

Install

1. Install bypass valve spring (C).

2. Install new gasket (B) on valve plug (A).

3. Install main oil filter bypass valve plug (A).

Figure 4-89. Removing or installing main oi l

filter bypass valve plug, gasket and spring .

Removal

Installation

4-89, 4-90

4-90, 4-89

4-91, 4-92

4-92, 4-91

4-93

4-93

4-94 through 4-96

4-96 through 4-94

4-94, 4-97, 4-98

4-98, 4-97, 4-94

Figure 4-90. Removing or installing mai n

oil filter bypass valve .

4-45