TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 234 of 779

Remove

1. Remove two

taching right

support.

2. Remove two

Install

cap screws (A) and lock washers at-

1. Position right turborsupercharger mounting base on tie

turbosupercharger mounting base to

rod, Install two cap screws ( B ) securing base to tie rod.

2. Install two cap screws (A) and lock washers securing

cap screws ( B ) and lock washers at-

base to support.

taching mounting base to tie rod. Remove base.

. .

Figure 5-79. Removing or installing right turbosupercharger

mounting base.

Remove

1. Remove two cap screws (A), lock washers, and one tie

rod clamp attaching turbsupercharger tie rod (B).

2. Remove tie rod and tie rod clamp seat.

Install

1. Position tie rod clamp seat and turbosupercharger tie

rod (B) on transmission adapter.

2. Position tie rod clamp on tie rod and install two cap

screws (A) and lock washers securing tie rod.

Figure 5-80. Removing or installing right and

left turbosupercharger mounting

base tie rod.

5-48