TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 239 of 779

Disconnect

Connect

1. Remove bolt (A) and lock washer attaching tur-

1. Position turbosupercharger oil inlet hose clamp (B) on

bosupercharger oil inlet hose clamp (B) to fuel injection

turbosupercharger oil inlet hose. Connect inlet hose (C)

pump base.

to elbow.

2. Disconnect turbosupercharger oil inlet hose (C) from

2. Install bolt (A) and lock washer securing clamp (B) to

elbow in crankshaft damper and oil filter housing.

fuel injection pump base.

Remove clamp (B) from hose.

Figure

5-88.

Disconnecting or connecting turbosupercharger oil inlet

hose-engines prior to rerouting of hoses and clamps.

5-53