TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 238 of 779

Disconnect

has a swivel nut at only one end. This swivel end

1. Disconnect fuel injection pump oil inlet hose at fuel

must be connected to the fuel injection pump

injection pump adapter (A).

adapter (A).

2. Disconnect inlet hose from pipe bushing (B) at

1. Connect inlet hose to pipe bushing (B) at crankshaft

crankshaft damper and oil filter housing. Remove inlet

damper and oil filter housing.

hose.

2. Position inlet hose in engine with swivel nut end at

Connect

Note.

The fuel injection pump oil inlet hose

adapter

(A) and connect hose to adapter.

Figure 5-87. Disconnecting or connecting fuel injection pump oil inlet

hose-engines with relocated hose clamps.

5-52