TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 247 of 779

Note. Refer to figure 4-152, 4-153, and 4-165

stallation of the fuel

for instructions covering removal and in-

assemblies.

5-11. Camshaft, Fan

and Bases

Refer to Table 5-8

Figure 5-103. Removing or installing fuel

injector nozzle and holder assembly.

injector nozzle and holder

Drives, Housings,

Note. Both the left and right camshafts are

removed in the same manner. For instructional

for illustrations and

purposes, the right camshaft has been used for

disassembly instructions. Figure references are

typical procedures.

listed in the table.

Table 5-8. Camshafts, Fan Drives, Housings, and Bases

Component

Figure Reference

Camshaft

5-104 through 5-116

Front Fan Drive Housing with Clutch Assembly and

5-117 through 5-126

Mounting Base

Fuel Injection Pump Mounting Base

5-127, 5-128

Rear Fan and Accessory Drive Housing with Clutch

5-129 through 5-134

Assembly and Mounting Base

5-61