TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 227 of 779

Remove

1. Remove four self-locking nuts (A), flat washers, and

bolts attaching exhaust pipe to exhaust manifold for

cylinder N

Os. lR, 2R, and 3R. Remove pipe. Remove

and discard exhaust manifold gasket.

2. Remove 12 self-locking nuts (B) and flat washers

attaching exhaust manifold to cylinder Nos. lR, 2R,

and 3R. Remove manifold. Remove and discard three

manifold gaskets.

3. Remove four self-locking nuts (C), flat washers, and

bolts attaching exhaust pipe to exhaust manifold for

cylinder N

OS. 1L, 2L, and 3L. Remove pipe. Remove

and discard exhaust manifold gasket.

4. Remove 12 self-locking nuts (D) and flat washers

attaching exhaust manifold to cylinder Nos. 1L, 2L,

and 3L. Remove manifold. Remove and discard three

manifold gaskets.

securing pipe to) manifold.

Figure 5-69. Removing or installing exhaust manifolds and exhaust

pipes-cylinder Nos. IR, 2R, and 3R and cylinder Nos. 1L, 2L, and

3L-engines prior to rerouting

of

crankcase breather tube.

5-41