TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 220 of 779

Remove

1. Disconnect and remove ten fuel injector nozzle fuel

return tubes (A) from injector nozzle fuel tube con-

nectors and fuel tube elbow connectors.

2. Disconnect and remove right nozzle fuel return tube

(B) from fuel tube connector at cylinder No. 6R.

3. Disconnect and remove left nozzle fuel return tube (C)

from fuel tube connector at cylinder No. 6L.

Install

1. Install and connect left nozzle fuel return tube (C) to

fuel tube connector at cylinder No. 6L.

2. Install and connect right nozzle fuel return tube (B) to

fuel tube connector at cylinder No. 6R.

3. Install and connect ten fuel injector nozzle fuel return

tubes (A) to injector nozzle fuel tube connectors and

fuel tube elbow connectors.

Figure 5-61. Removing or installing fuel injector nozzle fuel return

tubes-engines with metallic tubes.

5-34