TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 499 of 779

6-57. Overhaul of Primary and Second -

ary Fuel Filters and Associate d

Part s

a. Disassembly.

Disassemble primary an d

secondary fuel filters following instruction s

which accompany figures 6-244 and 6-245. Th e

mounting brackets, fuel hoses, and fittings were

removed during engine disassembly, Chapter 5 .

Disassemble

1. Remove retaining nut (A) and gasket (B). Discard

gasket.

2. Remove filter head (C).

3. Remove and discard preformed packing (D).

4. Remove and discard filter element (E).

5. Remove disc (F), gasket (G), washer (H), spring (J),

washer (K), and retaining ring (L) from filter body

stem.

Assemble

1. Install retaining ring (L), washer (K), spring (J),

washer (H), gasket (G), and disc (F) on filter body

stem.

2. Install a new filter element (E).

3. Position a new preformed packing (D) in filter head

(C).

4. Install filter head (C).

5. Position a new gasket (B) on retaining nut (A) and

install nut.

Figure 6-244. Disassembling or assemblin g

primary fuel filter .

6-20 5