TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 254 of 856
REMOVAL - Continued
4.
Disconnect hose assembly (Figure 2, Item 12) from check valve (Figure 2, Item 11) and then from elbow
(Figure 2, Item 31) at air box heater body (Figure 2, Item 30). If necessary, remove adapter
(Figure 2, Item 42) from hose.
5.
Disconnect connector (Figure 2, Item 32) from solenoid valve (Figure 2, Item 2) and connector
(Figure 2, Item 26) from ignition coil (Figure 2, Item 25).
6.
Remove nut (Figure 2, Item 17), nut (Figure 2, Item 18), lockwasher (Figure 2, Item 16), and lockwasher
(Figure 2, Item 19) from terminal (Figure 2, Item 14) and terminal (Figure 2, Item 21). Disconnect wiring
harness lead (Figure 2, Item 15) and lead (Figure 2, Item 20) from air pump (Figure 2, Item 45). Discard
lockwashers.
7.
Remove bolt (Figure 2, Item 33) and copper flat washer (Figure 2, Item 35) connecting ground wires
(Figure 2, Item 34) to air box heater body (Figure 2, Item 30) in upper front cover. Discard copper flat
washer.
8.
Remove screw (Figure 2, Item 38), lockwasher (Figure 2, Item 39), and flat washer (Figure 2, Item 40)
securing clip (Figure 2, Item 41) to upper front cover. Discard lockwasher. If necessary, remove clip
(Figure 2, Item 41) from air hose (Figure 2, Item 12).
9.
Disconnect ignition coil cable (Figure 2, Item 13) from ignition coil (Figure 2, Item 25) and igniter
(Figure 2, Item 29).
10.
Remove nut (Figure 2, Item 28), lockwasher (Figure 2, Item 27), screw (Figure 2, Item 22), and flat washer
(Figure 2, Item 23) securing clip (Figure 2, Item 24), bracket assembly (Figure 2, Item 44), and support
(Figure 2, Item 43). Discard lockwasher. If necessary, remove clip from harness plug.
11.
Remove wire wrap (Figure 2, Item 37) from harness assembly (Figure 2, Item 36), ignition coil cable
(Figure 2, Item 13), and air hose (Figure 2, Item 12). Remove air hose, ignition cable, and harness assembly
from engine.
12
11
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
2
37
38
39
40
41
37
12
42
43
44
45
MAINT_107
31
36
35
34
32
33
Figure 2.
Air Box Heater Components Removal.
TM 9-2815-205-24
0042
0042-2
Back to Top
