TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 253 of 856

FIELD MAINTENANCE

AIR BOX HEATER HARDWARE REPLACEMENT

(MODEL 5063-5299)

INITIAL SETUP:

Tools and Special Tools

Tool Kit, General Mechanic's

(WP 0104, Table 1, Item 113)

Wrench, Torque, Dial, 0–175 Lb-Ft

(WP 0104, Table 1, Item 120)

Materials/Parts

Cleaning Solvent (WP 0103, Table 1, Item 8)

Washer, Flat (WP 0105, Table 1, Item 117)

Materials/Parts (cont.)

Washer, Lock (WP 0105, Table 1, Item 175)

Washer, Lock

Qty: (3) (WP 0105, Table 1, Item 176)

Washer, Lock

Qty: (6) (WP 0105, Table 1, Item 23)

Washer, Lock

Qty: (2) (WP 0105, Table 1, Item 179)

REMOVAL

1.

Remove screw (Figure 1, Item 8), lockwasher (Figure 1, Item 9), and flat washer (Figure 1, Item 7) securing

hose clip (Figure 1, Item 6) to lower front cover. Discard lockwasher.

2.

Disconnect fuel inlet hose assembly (Figure 1, Item 4) from elbow (Figure 1, Item 1) at fuel solenoid valve

(Figure 1, Item 2) and from tee (Figure 1, Item 5). Remove hose assembly from engine.

3.

If necessary, remove clip (Figure 1, Item 6), clip (Figure 1, Item 3), and wirewrap (Figure 1, Item 10) from

hose assembly (Figure 1, Item 4).

1

2

3

4

5

6

7

9

10

4

8

MAINT_106

Figure 1.

Air Box Heater Fuel Line Removal.

TM 9-2815-205-24

0042

0042-1