TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 403 of 856
REMOVAL - Continued
6.
Remove seal (Figure 2, Item 22) and two gaskets (Figure 2, Item 21) from top of cylinder block. Discard seal
and gaskets.
7.
Remove gasket (Figure 2, Item 20) from rear of governor assembly (Figure 2, Item 15). Discard gasket.
8.
For model 5063-5299, remove six screws (Figure 2, Item 19), six lockwashers (Figure 2, Item 17), six flat
washers (Figure 2, Item 18), governor assembly (Figure 2, Item 15), and gasket (Figure 2, Item 14) from
blower (Figure 2, Item 13) end plate. Discard gasket and lockwashers.
9.
For models 5063-5392, 5063-5393, and 5063-539L, remove five screws (Figure 2, Item 19), short screw
(Figure 2, Item 16), six lockwashers (Figure 2, Item 17), six flat washers (Figure 2, Item 18), governor
assembly (Figure 2, Item 15), and gasket (Figure 2, Item 14) from blower (Figure 2, Item 13) end plate.
Discard gasket and lockwashers.
10.
Remove two clamps (Figure 2, Item 7) and hose (Figure 2, Item 8) from right fuel rod cover
(Figure 2, Item 9).
13
20
21
22
21
14
15
9
7
8
7
18
17
16
18
19
17
MAINT_175
Figure 2.
Governor and Blower Removal.
END OF TASK
TM 9-2815-205-24
0062
0062-3
Back to Top
