TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 418 of 856

REMOVAL

1.

Remove two screws (Figure 1, Item 21) and two small lockwashers (Figure 1, Item 20) from inlet tube

assembly (Figure 1, Item 1) at lower front cover (Figure 1, Item 15). Discard lockwashers.

2.

Remove two screws (Figure 1, Item 11), two lockwashers (Figure 1, Item 12), and two flat washers

(Figure 1, Item 13) from bracket (Figure 1, Item 18) at main bearing cap (Figure 1, Item 14).

Discard lockwashers.

3.

Remove inlet tube assembly (Figure 1, Item 1) and gasket (Figure 1, Item 19) from cylinder block.

Discard gasket.

4.

Remove two bolts (Figure 1, Item 2), two lockwashers (Figure 1, Item 3), and strainer (Figure 1, Item 4) from

inlet tube assembly (Figure 1, Item 1). Discard lockwashers.

5.

Remove bolt (Figure 1, Item 7), lockwasher (Figure 1, Item 6), flat washer (Figure 1, Item 5), and bracket

(Figure 1, Item 10) from inlet tube assembly (Figure 1, Item 1). Discard lockwasher.

6.

Remove two nuts (Figure 1, Item 16), two lockwashers (Figure 1, Item 17), four flat washers

(Figure 1, Item 9), two bolts (Figure 1, Item 8), and bracket (Figure 1, Item 18) from bracket

(Figure 1, Item 10). Discard lockwashers.

21

5

11

12

13

6

7

4

3

2

1

8

9

10

9

18

17

16

20

19

15

14

MAINT_179

Figure 1.

Oil Inlet Tube Removal/Installation.

END OF TASK

TM 9-2815-205-24

0065

0065-2