TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 437 of 856
REPLACEMENT
WARNING
Components of this engine are heavy and awkward to handle. Use correct lifting
procedures, indicated lifting devices, and/or assistance from other personnel. Failure to
comply may result in injury to personnel.
1.
Remove ring gear (Figure 2, Item 8) from flywheel assembly as follows:
a.
Place flywheel assembly (Figure 2, Item 2), crankshaft side down, on a solid flat surface or hardwood
blocks which fit inside diameter of ring gear (Figure 2, Item 8).
b.
Drive gear (Figure 2, Item 8) off flywheel assembly (Figure 2, Item 2) using a brass drift and hammer.
Work around circumference of ring gear to avoid binding.
8
2
MAINT_187
Figure 2.
Flywheel Inspection.
TM 9-2815-205-24
0070
0070-5
Back to Top
