TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 696 of 856
INSTALLATION - Continued
NOTE
If necessary, pry connecting rods apart before measuring side clearance.
10.
Using thickness gage, measure side clearance between each pair of connecting rods (Figure 18, Item 18).
Clearance limits are 0.008–0.016 inch (0.20–0.41 mm).
11.
Repeat Steps 1–10 to install additional liners, pistons, and rod assemblies. Use cylinder liner hold-down
clamp (Figure 18, Item 1) to hold installed liners in place.
12.
Remove all cylinder liner hold-down clamps (Figure 18, Item 1).
18
1
MAINT_370
Figure 18.
Piston Cylinder Liner Hold-Down Clamp.
END OF TASK
FOLLOW ON TASK
1.
Install cylinder head (WP 0073).
2.
Install oil pump inlet tubes (model 5063-5299) (WP 0064).
3.
Install oil pan (WP 0063).
END OF TASK
END OF WORK PACKAGE
TM 9-2815-205-24
0094
0094-22
Back to Top
