TM 9-2815-205-34
3-5. TURBOCHARGER MOUNTING BRACKET AND EXHAUST TUBES REPLACEMENT
(MODELS 5063-5393 AND 5063-539L) (Cont)
(6)
Install insulation blanket (2) on exhaust tee (5), insulation blanket (3) on left exhaust tube 6),
and insulation blanket (4) on right exhaust tube (7). Fasten blankets together using wire (1 and
wire-twister pliers as follows:
(a) Loop wire around first capstan (20) and apply two twists using wire-twister pliers.
(b)
(c)
(d)
While holding insulation blanket in place by hand, place ends of wire on each side of
adjacent capstan (21) and apply at least two more twists using wire-twister pliers.
Trim wire 3/4 inch (20 mm) from second capstan (21).
Repeat for remaining pairs of capstans on all blankets.
END OF TASK
FOLLOW-ON MAINTENANCE
Para Description
3-3 Install turbocharger.
3-12
Change 1