TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 141 of 596

TM 9-2815-205-34

3-6. TURBOCHARGER MOUNTING BRACKET AND EXHAUST TUBES REPLACEMENT

(MODELS 5063-5395, 5063-5398, AND 5063-539F) (Cont)

c. Installation

(1)

(2)

NOT E

On model 5063-5398, using 405681-1 turbocharger, a spring pin (16) is pressed in

exhaust tee (5).

If removed, install spring pin (16) in outlet flange on exhaust manifold tee (5).

Install support bracket (13), four Iockwashers (15), and four screws (14) on flywheel housing.

Torque screws to 71-75 Ib-ft (96-102 N·m).

(3) Install exhaust tee (5), coupling (12), four screws (9), four Iockwashers (11), and two nuts (10)

on support bracket (13). Do not tighten screws.

(4) Install exhaust tube (6), exhaust tube (7), and four couplings (8) on exhaust tee (5) and

exhaust manifolds (17). Torque screws to 30-35 Ib-ft (41-47 N

.

m). Tighten couplings until

springs are completely compressed.

3-16