TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

  TM-9-2815-205-34 - Page 142 of 596

(5)
TM 9-2815-205-34
On model 5063-539F, install insulation blanket (2) on exhaust tee (5), insulation blanket (3) on
left exhaust tube (6), and insulation blanket (4) on right exhaust tube (7). Fasten insulation
blankets together using wire (1) and wire-twister pliers as follows:
(a) Loop wire around first capstand (18) and apply two twists using wire-twister pliers.
(b)
(c)
(d)
While holding insulation blanket in place by hand, place ends of wire on each side of
adjacent capstand (19) and apply at least two more twists using wire-twister pliers.
Trim wire 3/4 inch (20 mm) from second capstand (19).
Repeat for remaining pairs of capstands on all insulation blankets.
END OF TASK
FOLLOW-ON MAINTENANCE
Para Description
3-3 Install turbocharger.
3-17


Back to Top