TM 9-2815-205-34
3-8. ENGINE LIFTER BRACKETS REMOVAL/INSTALLATION
This task covers: a. Removal
b. Installation
INITIAL SETUP
MODELS
MATERIALS/PARTS
All
6
Lockwashers (App F, Item 99)
TOOLS AND SPECIAL TOOLS
Tool kit, general mechanics (App B, Item 107)
Wrench, torque (App B, Item 116)
a. Removal
(1)
(2)
(3)
Remove two screws (1), two lockwashers (2), and lifting bracket (3) from front of left cylinder
head. Discard lockwashers.
Remove two screws (4), two lockwashers (5), and lifting bracket (6) from rear of right cylinder
head. Discard lockwashers.
For models 5063-5398, 5063-5395, and 5063-539F, remove two screws (7), two lockwashers
(8), and lifting bracket (9) from front of right cylinder head. Discard lockwashers.
b. Installation
(1) Install lifting bracket (3), two lockwashers (2), and two screws (1) on front of left cylinder head.
(2) Install lifting bracket (6), two lockwashers (5), and two screws (4) to rear of right cylinder head.
(3) For models 5063-5398,5063-5395, and 5063-539F, install lifting bracket (9), two lockwashers
(8), and two screws (7) on front of right cylinder head.
(4) Torque all lifting bracket bolts to 30-35 lb-ft (41-47 NŽm).
END OF TASK
3-22