TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 152 of 596

TM 9-2815-205-34

b. Cleaning/Inspection

• Dry cleaning solvent P-D-680 i

S

toxic and flammable. Wear protective goggles

and gloves and use in a well-ventilated area. Avoid contact with skin, eyes, and

clothes. Do not breathe vapors. Do not use near open frame or excessive heat.

The flash point is 100-138°F (38-50°C). If you become dizzy while using cleaning

solvent, get fresh air immediately and seek medical aid. If contact with eyes is

made, wash with water and get medical aid immediately.

Ž Compressed air used for cleaning purposes will not exceed 30 PSI. Use only

with effective chip guarding and personal protective equipment (goggles/shield,

gloves, etc.)

(1) Clean fuel solenoid valve with rag moistened with cleaning solvent. Clean brackets with

cleaning solvent. Dry components with compressed air.

(2) Inspect hoses for cuts, tears, kinks, or damage.

(3) Inspect wiring harness for cuts, tears, burns, or damage.

c. Test

(1)

(2)

Apply a 24 V dc power source to solenoid

valve (7) and listen for valve to “click’ to

confirm if valve is opening and closing as

power is applied. If no indication of

movement is present, replace solenoid

valve.

Disconnect power source from solenoid

valve (7).

3-27

WARNING