TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 148 of 596

3-9. ENGINE FRONT MOUNTING BRACKET

AND 5063-539L)

TM 9-2815-205-34

REMOVAL/INSTALLATION (MODELS 5063-5393

This task covers: a. Removal

b. Installation

INITIAL SETUP

MODELS

MATERIALS/PARTS

5063-5393

5063-539L

6

Lockwashers (App F, Item 99)

6

Lockwashers (App F, Item 100)

TOOLS AND SPECIAL TOOLS

Tool kit, general mechanics (App B, Item 107)

Wrench, torque (App B, item 116)

a. Removal

(1)

(2)

Remove long screw (1), mid-sized screw (2), short screw (3), three lockwashers (4), three flat

washers (5), large diameter screw (6), lockwasher (7), flat washer (8), spacer (9), and bracket

(10) from front of engine. Discard lockwashers.

Remove five short screws (11), five lockwashers (12), three long screws (13), three lockwashers

(14), and engine bracket (15) from lower front cover (16). Discard lockwashers.

b. Installation

(1) Install engine bracket (15), five lockwashers (12), five short screws (11), three lockwashers (14),

and three long screws (13) on lower front cover (16). Torque screws (13) to 30-35 lb-ft (41 -47

NŽm) and screws (11) to 46-50 lb-ft (62-68 NŽm).

(2) Install bracket (10), spacer (9), three flat washers (5), three lockwashers (4), long screw (1),

mid-sized screw (2), short screw (3), flat washer (8), lockwasher (7), and large diameter screw

(6) on bracket (15). Torque screw (6) to 46-50 lb-ft (62-68 NŽm) and screws (1, 2, and 3) to

30-35 lb-ft (41-47 NŽm).

END OF TASK

Change 1

3-23