TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 151 of 596

TM 9-2815-205-34

3-10. AIR BOX HEATER HARDWARE REPLACEMENT (MODELS 5063-5299, 5063-5395,

5063-5398, AND 5063-539F) (Cont)

(12)

(13)

(14)

(15)

(16)

(17)

(18)

(19)

(20)

Remove fuel line (50) from elbow (51) at

solenoid valve (7) and from elbow (52) at

air box heater body (34).

NOT E

For access to screws (53),

loosen nut on top of solenoid

(7) and rotate coil housing.

Remove two screws (53), two

Iockwashers (54), two flat washers (55)

and solenoid bracket (56) from upper

front cover. Discard Iockwashers.

Remove two screws (57) and two

lockwashers (58) from solenoid valve (7)

and bracket assembly (56). Discard

Iockwashers.

If necessary, remove elbow (6), elbow (51), and adapter (59) from solenoid valve (7).

For model 5063-5299: disconnect hose

assembly (60) from elbow (61) at air

pump (30) and from tee (62) at air inlet

elbow (63) and remove hose assembly. If

necessary, remove adapter (64) and

adapter (65) from hose. Remove tee and

pipe nipple (66) from air inlet adapter.

For models 5063-5395 and 5063-539F:

disconnect adapter (67) from elbow (61)

at air pump 30) and remove hose

assembly (68). If necessary, remove

adapter (67), adapter (69), connector

(70), and tee (71) from hose.

Remove two screws (72), two hardened

washers (73), and bracket assembly (46)

from top of blower (74).

Remove nut (75), Iockwasher (76), flat

washer (77), and screw (78) securing

bracket assembly (46) and support (47).

Discard lockwasher.

Remove two screws (79), two

Iockwashers (80), two flat washers (81),

and support (47) from front of engine.

Discard Iockwashers.

3-26