TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 160 of 596

(18) Remove two nuts (49), two Iockwashers (50), two screws (51), loop clamp (52) on air hose

assembly (53), and two loop clamps (54) on fuel hose assembly (55) from angle bracket (42).

Discard Iockwashers.

(19) Disconnect air hose assembly (53) from elbow (56) at air pump (37). Remove hose assembly

from engine. If necessary, remove loop clamp (52), pipe nipple (57), pipe plug (58), pipe tee

(59), and connector (60) from hose assembly.

(20) Remove four screws (61), four Iockwashers (62), four flat washers (63), and bracket assembly

(64) from angle bracket (42). Discard lockwashers.

(21) Remove two long screws (65) and two Iockwashers (66) from top of angle bracket (42).

Remove two short screws (67), two Iockwashers (68), and two flat washers (69) from front of

bracket. Remove bracket from engine. Discard Iockwashers.

3-35

TM 9-2815-205-34