TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 163 of 596

TM 9-2815-205-34

3-11. AIR BOX HEATER HARDWARE REPLACEMENT (MODEL 5063-5392) (Cont)

(6)

(7)

(8)

(9)

(10)

(11)

(12)

3-38

Install three round wires of harness assembly (11), copper washer (24), and bolt (23) in air

box heater (15). Torque bolt to 13-17 Ib-ft (18-23 N

.

m).

Connect ignition wire (34) to spark igniter (36) and ignition coil (35).

If removed, install adapter (32) in air hose (30). Connect hose to check valve (31) and adapter

on hose to elbow (33) in air box heater (15).

Install terminal of harness assembly (11), clip (47), screw (46), two flat washers (45),

Iockwasher (44), and nut (43) to top of angle bracket (42). Torque nut to 30-35 Ib-ft (41-47

N

.

m).

If removed, install clip (41) on harness assembly (11). Install screw (40), Iockwasher (39), and

nut (38) to bottom of angle bracket (42). Torque nut to 7-9 Ib-ft (10-12 N-m).

Install wire wrap (48) and clip (28) around harness assembly (11), ignition wire (34), and air

hose (30).

Install clip (28), flat washer (27), Iockwasher (26), and screw (25) on upper front cover (29).

Torque screw to 30-35 Ib-ft (41-47 N

.

m).