TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 167 of 596

TM 9-2815-205-34

3-12. AIR BOX HEATER HARDWARE REPLACEMENT (MODEL 5063-5393) (Cont)

(11)

(12)

(13)

(14)

(15)

(16)

(17)

Disconnect hose assembly (29) from elbow (30) in solenoid valve (14). Remove hose assembly

from engine. If necessary, remove loop clamp (31) from hose assembly.

Remove tube assembly (32) from elbow (33), in solenoid valve (14), and elbow (34) in air box

heater (13).

NOT E

For access to screws (35),

loosen nut on top of solenoid

(14) and rotate coil housing.

Remove two screws (35), two

Iockwashers (36), two flat washers (37),

and solenoid bracket (38) from front cover

(6). Discard Iockwashers.

Remove two machine screws (39), two

Iockwashers (40), and solenoid valve (14)

from solenoid bracket (38). Discard

Iockwashers.

If necessary, remove elbow (30), elbow

(33), and adapter (41) from solenoid

valve (14).

Remove four screws (42), four

Iockwashers (43), four flat washers (44),

and bracket assembly (45) from mountmg

bracket (26). Discard Iockwashers.

Remove two long screws (46), two

Iockwashers (47), and two flat washers

(48) from top of mounting bracket (26).

Remove two short screws (49), two

Iockwashers (50), and two flat washers

(51) from front of mounting bracket.

Remove mounting bracket from engine.

Discard Iockwashers.

3-42