TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 164 of 596

(13)

(14)

(15)

(16)

(17)

(18)

TM

9-2815-205-34

If removed, install elbow (13) in outlet port and adapter (22) in inlet port of solenoid valve (8).

Install elbow (7) in adapter.

Install solenoid valve (8), two Iockwashers (21), and two machine screws (20) on mounting

bracket (18) with fuel inlet facing right side of engine. Tighten screws.

Loosely install mounting bracket (18), two Iockwashers (17), and two machine screws (16) on

engine bracket (19).

Connect harness assembly (11) to solenoid valve (8) and ignition coil (35).

Install two harness assembly leads (71 and 72) and two nuts (73 and 74) on air pump (37)

Connect tube assembly (12) to elbow (13), in solenoid valve (8), and to elbow (14), in air box

heater (15). Tighten connections and two machine screws (16).

(19) Connect hose assembly (6) to elbow

Tighten connections.

(7) in solenoid valve (8) and tee (9) to fuel spill tube (10).

(20) Install loop clamp (4), flat washer (3), Iockwasher (2), and screw (1) in lower front cover (5).

Torque screw to

30-35 Ib-ft (41-47 N-m).

END OF TASK

3-39