TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 157 of 596
TM 9-2815-205-34
3-11. AIR BOX HEATER HARDWARE REPLACEMENT (MODEL 5063-5392)
This task covers: a. Removal
b. Cleaning/Inspection
c. Test
d. Installation
INITIAL SETUP
MODELS
MATERIALS/PARTS
5063-5392
4
Lockwashers (App F, Item 96)
9
Lockwashers (App F, Item 99)
TOOLS AND SPECIAL TOOLS
1
Washer, copper (App
F ,
F, Item 187)
Tool kit, general mechanics (App B, Item 107)
2
Lockwashers (App
Item 100)
Wrench, torque (App B, Item 116)
1
Lockwasher (App F, Item 97)
EXPENDABLE/DURABLE SUPPLIES
Cleaning solvent (App C, Item 9)
a. Removal
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Remove screw (1), Iockwasher (2), flat washer (3), and loop clamp (4) on lower front cover (5).
Discard Iockwasher.
Disconnect hose assembly (6) from elbow (7) in solenoid valve (8).
Disconnect hose assembly (6) from tee (9). Disconnect tee from fuel spill tube (10).
Disconnect harness assembly (11) from fuel solenoid valve (8).
Disconnect tube assembly (12) from elbow (13) in solenoid valve (8) and from elbow (14) in air
box heater (15).
Remove two machine screws (16), two Iockwashers (17), and mounting bracket (18) from
engine bracket (19). Discard Iockwashers.
Remove two machine screws (20), two Iockwashers (21), and solenoid valve (8) from mounting
bracket (18). Discard Iockwashers.
If necessary, remove elbow (7), elbow (13), and adapter (22) from solenoid valve (8).
(3-31 blank)/3-32
Back to Top
