TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 283 of 596

TM 9-2815-205-34

3-45. LOWER FRONT COVER, OIL PUMP. AND OIL PRESSURE REGULATOR

(Cont)

REPLACEMENT

Install spacer ring (9) on crankshaft (8) with bevel toward cylinder

block and push spacer ring into oil seal (32).

Torque front cover screws (1, 2, and 3) to 30-35 Ib-ft (41-47 NŽm).

END OF TASK

FOLLOW-ON MAINTENANCE

Para Description

3-38 Install engine front support (model 5063-5299).

3-39 Install engine front support (model 5063-5392),

3-36 Install crankshaft spacer (models 5063-5299,5063-5393 and 5063-539L).

3-37 Install crankshaft hub or pulley (models 5063-5392, 5063-5395, 5063-5398 and 5063-539F)

3-34 Install oil pump inlet and outlet tubes (model 5063-5299).

3-35 Install oil pump inlet and outlet tubes (all except model 5063-5299).

3-33

Install oil pan.

3-11

3-10

3-9

Install fuel line clip and solenoid valve bracket (model 5063-5392)

Install fuel line clip and solenoid valve bracket (all except model 5063-5392).

Install engine front mounting bracket (models 5063-5393 and 5063-539L).

3-154

Change 1